Braun Wind Turbine Antaris 12 KW

Braun Wind Turbine Antaris 12 KW Product Description

Antaris 12 Kw

Antaris 12KW

Technical Specifications ANTARIS 12.0 kW

Working grid feed in at 2.5 m/sec. wind speed after start up, depending on the repeller. Purpose built for inland areas with low untill moderate wind speed. From an average wind speed with 6.0 m/sec. we use a repeller with 5.8 m diameter!

Generator

• Permanent magnet rotor, brushless, gearless, maintenance free
• Extremely strong permanent magnets for a high level of efficiency NdFeBo permanent magnets, resistent to temperatures up to 150 C
• Special ball bearings for reliably taking up radial and axial forces
• 3 phase current
• Separate rectifier
• Either direction of rotation
• Voltage 0 1000 VDC
• Start of feed in at approx. 65 rpm
• Power 12.000 watts at 255 rpm and 500 VDC
• Evenly rising power curve
• Weight 160 kg
• Aluminium housing, surface cooling, base anchoring
• Protection class IP56

Rotor

• Hub connection with aluminium flange and pressure relief plate
• Stainless steel screw connections with locknuts
• 3 rotor blades in glass fibre / carbon fibre laminate
• Computer designed aerodynamic profile
• Winglets on blade tips to minimise noise
• Approx. 6.50 m diamater optionally 5.8 m > 6.0 m/s average wind speed
• Weight of each blade approx. 14.0 kg
• Dynamically and statically balanced
• Direction of rotation anticlockwise viewed from front
• Max. rotational speed 255 rpm
• GRP spinner cap
• Rotor colour to client specification

Support element comprising

• Wind vane weatherproof HDPE, off white, slightly transparent
• Square stainless steel tube as support element
• All screw connections in stainless steel and fitted with locknuts
• Steel bracket as support for generator, configured for plug in connection with azimuth bearing, fully galvanised
• Protected by patented rotor blade positioning system
• Mast adapter with flange connector tube 220 mm

Storm protection

• Rotor blade positioning helicopter position
• Voltage monitoring with 18.0 kW braking resistance
• Generator short circuit
• Temperature monitoring from Alternator and Inverter

Control cabinet

• Control system with Turbine Power Curve
• 3 phased grid feed in with Smart!wind Inverter 10.0 kW
• Control electronics with 3 phased turbine controller
• Connections / plug connectors protected against polarity reversal
• Controlling of the 3 alternator phases during turbinemode
• Reset switch with key removable
• Emergency OFF switch
• 18.0 kW braking resistance
• Rectifier, display etc.

ANTARIS 12.0 kW

size difference between ANTARIS 3.5 kW and 12.0 kW

The Alternator CK18 for ANTARIS 12.0 kW. 12.0 kW 255 rpm, max. 22 kW. Maximum power for wind, water and CHP!

ANTARIS 12.0 kW Power curve

ANTARIS 12.0 kW production scheme
Blue Power per day, Red Peak Power